## Links
- [Split A GPU Between Multiple Computers - Proxmox LXC (Unprivileged)
](https://youtu.be/0ZDr5h52OOE?si=F4RVd5mA5IRjrpXU)
- [Must-Have OpenWrt Router Setup For Your Proxmox
](https://youtu.be/3mPbrunpjpk?si=WofNEJUZL4FAw7HP)
- [Docker on Proxmox LXC 🚀 Zero Bloat and Pure Performance!
](https://youtu.be/-ZSQdJ62r-Q?si=GCXOEsKnOdm6OIiz)
- [stuff](url)

## 'pct' commands
```markdown
[pct commands](https://git.crazystorm.xyz/medusa/the_information_nexus/src/branch/main/docs/tech_docs/pct.md)
```

- [pct commands](https://git.crazystorm.xyz/medusa/the_information_nexus/src/branch/main/docs/tech_docs/pct.md)

---

## OpenWRT Container Setup

### Commands
```bash
# Create and configure the OpenWRT container
pct create 100 /var/lib/vz/template/cache/openwrt-rootfs.tar.xz --unprivileged 1 --arch amd64 --ostype unmanaged --hostname openwrt-0 --password changeme --tag network --storage local-lvm --memory 256 --swap 128 --rootfs local-lvm:1,size=512M --net0 name=eth0,bridge=vmbr0,firewall=1 --net1 name=eth1,bridge=vmbr1,firewall=1 --cores 1 --cpuunits 500 --onboot 1 --debug 0
```

# Start the container
```bash
pct start 100
```

# Access the container's console
```bash
pct console 100
```

# Update and install packages
```bash
opkg update
```

```bash
opkg install qemu-ga
```

```bash
reboot
```

# Network and firewall configuration

```bash
vi /etc/config/network
```

```bash
/etc/init.d/network restart
```

```bash
vi /etc/config/firewall
```

```bash
/etc/init.d/firewall restart
```

```bash
vi /etc/config/firewall
```

```bash
uci add firewall rule
uci set firewall.@rule[-1].name='Allow-SSH'
uci set firewall.@rule[-1].src='wan'
uci set firewall.@rule[-1].proto='tcp'
uci set firewall.@rule[-1].dest_port='22'
uci set firewall.@rule[-1].target='ACCEPT'

uci add firewall rule
uci set firewall.@rule[-1].name='Allow-HTTPS'
uci set firewall.@rule[-1].src='wan'
uci set firewall.@rule[-1].proto='tcp'
uci set firewall.@rule[-1].dest_port='443'
uci set firewall.@rule[-1].target='ACCEPT'

uci add firewall rule
uci set firewall.@rule[-1].name='Allow-HTTP'
uci set firewall.@rule[-1].src='wan'
uci set firewall.@rule[-1].proto='tcp'
uci set firewall.@rule[-1].dest_port='80'
uci set firewall.@rule[-1].target='ACCEPT'
```

```bash
uci commit firewall
```

```bash
/etc/init.d/firewall restart  
```

---

## Alpine Container Setup


### Commands
```bash
# Create and configure the Alpine container
pct create 300 /var/lib/vz/template/cache/alpine-rootfs.tar.xz --unprivileged 1 --arch amd64 --ostype alpine --hostname alpine-0 --password changeme --tag docker --storage local-lvm --cores 2 --memory 1024 --swap 256 --rootfs local-lvm:1,size=8G --net0 name=eth0,bridge=vmbr0,firewall=1 --keyctl 1 --nesting 1 --cpuunits 1000 --onboot 1 --debug 0
```

# Enter the container
```bash
pct enter 300
```

# System update and Docker installation
```bash
sed -i '/^#.*community/s/^#//' /etc/apk/repositories
```

```bash
apk update && apk upgrade
```

```bash
apk add qemu-guest-agent newt curl openssh mc sudo build-base gcc abuild binutils binutils-doc gcc-doc docker
```

```bash
rc-service docker start
```

```bash
rc-update add docker default
```

# Configure network and SSH
```bash
setup-interfaces
```

```bash
service networking restart
```

```bash
apk add openssh
```

```bash
rc-update add sshd
```

```bash
service sshd start
```

# Configure and start SSH service
```bash
vi /etc/ssh/sshd_config
```

```bash
service sshd restart
```

# Create a system user and add them to the docker group and sudoers
```bash
adduser -s /bin/ash medusa
```

```bash
addgroup medusa docker
```

```bash
visudo
```

# Test Docker installation
```bash
docker run hello-world
```

---

## Kali Linux Container Setup

### Description
This section provides instructions for configuring a Kali Linux container, geared towards security professionals and penetration testers. This container is set up with increased resources to support the intensive tasks typically performed on Kali Linux, including various security tests and analyses.

### Step-by-Step Configuration
1. Create the Kali Linux container with enhanced CPU and memory settings to handle demanding security tools.
2. Start the container to ensure it is running smoothly.
3. Perform system updates and install necessary security tools as required.

### Commands
```bash
# Create and configure the Kali Linux container
pct create 200 /var/lib/vz/template/cache/kali-default-rootfs.tar.xz --unprivileged 1 --arch amd64 --ostype debian --hostname kali-0 --password changeme --tag tools --storage local-lvm --

cores 2 --memory 2048 --swap 1024 --rootfs local-lvm:1,size=10G --net0 name=eth0,bridge=vmbr0,firewall=1 --cpuunits 1500 --onboot 1 --debug 0 --features nesting=1,keyctl=1
```